How To Fix Rb On Xbox One Controller

If you're looking for how to set a broken bumper on your Xbox One controller, you're not alone.

One of the more common pieces that break on the Xbox I controller is the left (LB) and right (RB) bumpers.

Read More: how to fix xbox one controller bumper

These bumpers are used heavily on the controller and are not meant for extended habiliment and tear that a lot of gamers put on them.

Read on to learn more about how you tin can fix your broken Xbox One controller bumpers.

Why practice the LB/RB bumpers break on an Xbox One controller?

Root Cause of Broken Bumper LB RB on Xbox One Controller

You lot may find that your left bumper or right bumper isn't every bit responsive as it once was, or that your Xbox One controller bumper isn't working at all.

In some cases, your Xbox Ane controller bumpers might even be stuck or jammed.

There are a few different causes of a cleaved lb/rb controller bumper, but chances are this is due to a fracture in the plastic arm that connects the bumper to the push button that it engages on the Xbox One controller circuit board.

This piece can break and render the bumper useless.

This part tin can be replaced or repaired to fix your bumper.

Step one – Open the Xbox Controller Shell

Information technology'southward impossible to gear up a broken bumper without opening your controller.

Useful for You: How to Gear up Invalid Partition Table Error in Windows 10?[4 Means]

Sometimes, y'all tin can fix it with only opening the outer shell of the controller, simply generally you'll need to have a few more pieces off.

You can watch XboxDIY's videos on How to Open an Xbox One Controller and How to Reassemble an Xbox One Controller:

How to Open an Xbox One Controller
How to Reassemble an Xbox I Controller

Step 2 – Repair or Replace the Broken LB/RB Bumper

There are ii potential ways to fix an Xbox One Bumper when it breaks.

Depending on the status of your bumper, you can either endeavour to repair the bumper by gluing it dorsum together or, just supercede the bumpers.

Option 1 – Super Glue Bumper Back Together

The easiest way to set a cleaved bumper on your Xbox 1 controller is past super gluing the broken slice back together.

Most often, the broken piece is non damaged and it tin be glued back together.

In some cases, where the bumper has shattered or the cleaved piece is missing, y'all may demand to skip ahead in the article and learn how to replace the bumpers on your Xbox 1 controller.

What You lot Demand to Mucilage Your Bumper

Plastic Trim Tool
Torx Screwdriver Set
Super Glue

In our experience, fauna strength commonly snaps the arm that connects the bumper to the circuit board. The design is poor, and newer Xbox I controllers accept a improve and more durable design.

Y'all'll need to re-glue the piece together using superglue, being conscientious to brand sure it lines up properly and sits flush confronting the part of the broken bumper.

If these parts are severely damaged or don't sit affluent – y'all'll demand to purchase a new set of Xbox I controller bumpers and swap them out.

Useful for You: Fixing Slippery Stamped
Concrete Near Pools

Use a small dab of superglue, making sure that the sides of the ii snapped pieces are articulate of any residue glue – the area where the bumpers sit in the controllers is tight, and any additional mass could interfere with how the bumper works.

If you lot're not precise in re-gluing the piece, the broken plastic arm on the bumper won't exist able to generate the strength needed to appoint the button on the circuit board. This might work, simply information technology is not very satisfactory.

Choice 2 – Supersede the Cleaved Bumpers with New Parts

You can very easily fix your cleaved Xbox Ane controller bumpers by ownership new ones and swapping them out.

Not only is this easier and more reliable than trying to fix your broken bumpers, but information technology besides allows yous to customize your controller with new colors and designs.

You could even pigment your Xbox One controller buttons while you lot're at it.

What You Need to Replace Xbox One Controller Bumper

Plastic Trim Tool
Torx Screwdriver Fix
Replacement Xbox One Controller Bumpers (LB/RB)

You'll need to open your Xbox One controller, equally with most Xbox Ane controller repairs, and swap the bad bumper out with a new i.

We recommend making sure the replacement bumpers you social club are the correct buttons for your Xbox 1 controller model, as multiple new models take become available since writing this article.

Wikipedia – Xbox One Controller Models and Other Information

Pro Tips and Tricks

Be careful with super glue. There is a reason it is called Super Glue!
Don't put too much glue on the broken bumper piece as this may prevent the piece from fitting dorsum into the controller
Make sure the super mucilage has plenty of time to dry (x-15 minutes after you lot hold the piece together)
If you're looking to get a new colour controller, this is a great fourth dimension to practice it. We even have an article on How to Paint Your Xbox One Controller.
You tin test to see if your bumper is working by putting on the excursion lath with the LB and RB bumpers and the front of the shell. Clip-on the bumper and yous should be skillful to get!

Were you able to repair your broken or damaged Xbox 1 controller bumper?

We hope that our article on how to repair or replace your broken bumper was useful and that your controller is back up and running.

If yous have whatsoever questions, feel gratis to drib them in the comment department below or visit our Contact folio.

Do you lot have any tips, tricks, or suggestions for others who are trying to fix their broken Xbox 1 controller bumper? We would dearest to hear from you in the comments below!

Height Useful: Here's How to Fix A Bent Phone